Sale!

৳ 6,300.00 ৳ 6,250.00

  • Humidity Protection PCB design
  • Electrostatic Protection and Power Failure Protection design
  • Supports 3rd Gen. Intel® 22nm CPUs and 2nd Gen. Intel® Core™ CPUs (LGA1155 socket)
  • Unique On/Off Charge delivers the best recharging capability to iPad, iPhone and iPod Touch
  • Supports 3rd generation PCI-Express interface
  • Enhanced Intel HD Graphics 2000/3000 integrated with the processor
Category:

Description

  • CPU
    1. Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package
    2. L3 cache varies with CPU

    (Some Intel® Core™ processors require a graphic card, please refer “CPU support List” for more information.)

  • Chipset
    1. Intel® H61 Express Chipset
  • Memory
    1. 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
      * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
    2. Dual channel memory architecture
    3. Support for DDR3 1333/1066/800 MHz memory modules
    4. Support for non-ECC memory modules
    5. Support for Extreme Memory Profile (XMP) memory modules
      * To support XMP memory, you must install an Intel® 22nm (Ivy Bridge) CPU.

    (Please refer “Memory Support List” for more information.)

  • Onboard Graphics
    Integrated Graphics Processor:

    1. 1 x D-Sub port
    2. Maximum shared memory of 1 GB
  • Audio
    1. Realtek® ALC887 codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
      * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
  • LAN
    1. Realtek® GbE LAN chip (10/100/1000 Mbit)
  • Expansion Slots
    1. 1 x PCI Express x16 slot, running at x16
      (The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
      * Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility.
    2. 1 x PCI Express x1 slot
      (The PCI Express x1 slot conforms to PCI Express 2.0 standard.)
  • Storage Interface
    Chipset:

    1. 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
  • USB
    Chipset:

    1. Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
  • Internal I/O Connectors
    1. 1 x 24-pin ATX main power connector
    2. 1 x 4-pin ATX 12V power connector
    3. 4 x SATA 3Gb/s connectors
    4. 1 x CPU fan header
    5. 1 x system fan header
    6. 1 x front panel header
    7. 1 x front panel audio header
    8. 2 x USB 2.0/1.1 headers
    9. 1 x speaker header
    10. 1 x chassis intrusion header
    11. 1 x Clear CMOS jumper
  • Back Panel Connectors
    1. 1 x PS/2 keyboard port
    2. 1 x PS/2 mouse port
    3. 1 x D-Sub port
    4. 4 x USB 2.0/1.1 headers
    5. 1 x RJ-45 port
    6. 3 x audio jacks (Line In, Line Out, Mic In)
  • I/O Controller
    1. iTE® I/O Controller Chip
  • H/W Monitoring
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System fan speed detection
    4. CPU overheating warning
    5. CPU/System fan fail warning
    6. CPU/System fan speed control
      * Whether the fan speed control function is supported will depend on the cooler you install.
  • BIOS
    1. 1 x 32 Mbit flash
    2. Use of licensed AMI EFI BIOS
    3. PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
  • Unique Features
    1. Support for @BIOS
    2. Support for Q-Flash
    3. Support for Xpress Recovery2
    4. Support for EasyTune
      * Available functions in EasyTune may differ by motherboard model.
    5. Support for ON/OFF Charge
  • Bundled Software
    1. Norton® Internet Security (OEM version)
  • Operating System
    1. Support for Windows 8.1/8/7/XP
  • Form Factor
    1. Micro ATX Form Factor; 19.0cm x 17.0cm

Reviews

There are no reviews yet.

Be the first to review “”

Your email address will not be published. Required fields are marked *